Windows Vista Dial-Up Setup

Click on "Start" (or windows button), select "Control Panel" then "Network and Internet" then "Network and Sharing Center."

Next, click on "Set up a connection or network."

The following box will be displayed:

Select "Set up a dial-up connection" and click "next"

A list of modems will appear. Choose the modem you want to connect with and click next. If no modems appear, you either do not have a modem on your computer or your modem is not installed properly.

After selecting a modem the setting box will appear asking you to type in the information for your ISP. Type in the following information in the appropriate fields:

• Dial-up phone number:

  	In Calgary	In Edmonton	Other
  All modem speeds	403-879-9553	780-851-9503	Click here

  
  
• User name: Enter your Nucleus dial-up user id in the form of a email address. example: username@nucleus.com.
• Password: Enter the password associated with your Nucleus dial-up account. If you do not want to enter the password every time you connect, place a check in the box next to "Remember this password."
• Connection name: Enter a name you will remember it by (e.g. Nucleus).

Please refer to the example image below:

When all the information is filled out click "Connect"

To connect in the future, go to Start then Connect to. Your list of connections will show up. Choose the "Nucleus" connection and click Connect